Washbasin standing solid w/ natural edged oak

Further product informations

Solid tree edge standing washbasin. The main focus of the solid washbasin stand is its particularly stable and solid construction. Unless a special request is specified after ordering, the height at the top edge of the vanity top is approx. 76.5 cm. If you need an intermediate size (length, width) simply choose the next larger option when purchasing. After purchasing, write us a message with your desired size. The height of the vanity can also be adjusted immediately after purchase. (+- 5 cm no extra charge) The washbasin frame is made from a 40x40x2 mm box profile. No further attachment to the wall is necessary. The shelf (lower plate) is manufactured with straight edges as standard. For the vanity top, please choose between straight edge, plain edge or curved edge.

Surface treatment

If you do not specify a special request, the 2 side edges and the wall side are straight. At the front or You can choose between a straight edge, a simple natural edge and a curved (rustic) natural edge. Due to the natural edge, a deviation of 5 cm in depth can be expected. This means, for example, if you order a washbasin measuring 80×40 cm, the depth of the washbasin top will actually be between 40 and 45 cm at the underside of the tree edge. However, if you select the straight edge, the vanity top will be made exactly to the depth ordered.
Note: If you choose towel rails, please note that the washbasin can be moved by the towel rails to the left, right or on both sides by approx . 10 cm widened.

Drilling drain/fittings

If you have chosen the option of hole for drain/fittings or cutout according to sketch, please send us a hand sketch or the necessary positions and dimensions to info after purchase @spon-holz.de stating your order number. Please note that the center of the tap’s hole must be at least 7 cm away from the rear edge or side edge of the washbasin plate due to the 4 cm wide steel frame.

Evenness and tolerance

Wood is a living material and works. Light and temperature work before, during and after production. We strive to keep the surfaces level and work with millimeter precision. We have very good tools and high-quality machines, as well as qualified and talented staff. Nevertheless, we allow a tolerance of up to 3 mm, sometimes even a little more. Especially high lengths of benches, tables and washbasins cannot and cannot be kept and manufactured 100% flat. Slight imperfections are in the nature of things and have their own charm. You may get 100% flatness with plywood or solid wood elements that are glued together from many smaller pieces (glued wood panels with slat widths of 3-5 cm). However, since we work with long and 20 to 40cm wide, very natural planks, this is not the case. We also allow a few millimeters of tolerance when it comes to flatness.

Care

For optimal care of the solid tree edge standing washbasin, you can purchase a suitable care set. The recommended semi-annual re-oiling and minor repairs can easily be carried out yourself. The care set consists of a bottle of hard wax oil, hand sandpaper, a soft wax bar including a spatula and a cotton cloth for applying/wiping off the oil. Further information on care can be found here.

Origin of our woods

We source our oak wood exclusively from controlled forestry in Lower Saxony, Brandenburg and Bavaria.
We are also committed to reforestation and have already planted 130 oak trees this year and there are more to come.
Woods from Eastern European or non-European overexploitation have no chance with us!
Please read more about this on our page about our Values.
Also another link to “What is sustainable forestry“.