Solid wood table „Kofferfisch“ w/ runners

Further product information

As the name suggests, the solid wood table “Kofferfisch” impresses with its clear, simple and timeless design, which is based on consistently angular shapes. With this table, the focus is entirely on the solid wood top. The table runners with a cross-section of 60×20 mm ensure high stability.

All table tops have two screwed struts on the underside of the table to ensure permanent dimensional stability. The solid oak board is glued from 2-6 solid planks. Particular attention is paid to a homogeneous wood grain course.

Surface treatment

The dining table tree edge / natural edge is brushed and lightly sanded so that it retains its natural character. Larger knotholes, natural cracks and unevenness are sealed with very dark, black epoxy resin. Smaller knotholes, cracks and dried wormholes are treated with wax on the surface. In terms of quality, there is no need to completely fill up every little unevenness or dried wormhole. This is especially true for the underside. The surface is then sanded flat and oiled so that you can use your solid wood panel immediately after delivery.

If your desired size is between two sizes

Please choose the closest measurement. (e.g. choose a length of 200 cm if you only want your top to be 198 cm long) After purchasing, simply send us a message stating the order number with your desired measurement.

Please note that we have a manufacturing tolerance of 1-2 mm.

Flatness and tolerance

Wood is a living material and works. Light and temperature have an effect before, during and after production. We strive to keep the surfaces flat and work to millimetre precision. We have very good tools and high-quality machines, as well as qualified and talented staff. Nevertheless, we allow a tolerance of up to 3 mm, sometimes even a little more. Especially high lengths of benches, tables, as well as washstands, are and cannot be kept and manufactured 100 % even. Slight unevenness is in the nature of things and has its own charm. You may achieve 100 % evenness with plywood or solid wood elements that are glued together from many smaller pieces (glued wood panels with lamella widths of 3-5 cm). However, since we work with long and 20 to 40 cm wide planks that are kept very natural, this is not the case. We also allow a few millimetres of tolerance in terms of flatness.

Care / Maintenance

For the optimal care of the “Dining table tree edge”, you can purchase a suitable care set. The recommended half-yearly re-oiling and smaller repairs can easily be carried out by yourself. The care set consists of a bottle of hard wax oil, hand sandpaper, a soft wax stick including a spatula and a cotton cloth for applying/wiping off the oil. You can find more information on care here.

Origin of our woods

We obtain our oak wood exclusively from controlled forestry in Lower Saxony, Brandenburg and Bavaria.
We are also committed to reforestation and have already planted 130 oak trees this year, with more to come.
Wood from Eastern European or non-European over-exploitation does not stand a chance with us! Please read more about this on our page about our values.

Other sales platforms

You would like to order this table as usual on your usual sales platforms?
No problem. Below we have provided you with some links where you can order this table. Please note that on these shopping platforms the prices are slightly higher to compensate for the sales commission.

Etsy: Esstisch aus Massivholz mit Kufen von Spon-Holz
Ebay: Esstisch aus Massivholz mit Kufen von Spon-Holz